PCI Nanocret® FC

Fibre reinforced concrete smoothing compound for walls and soffits
PCI Nanocret® FC
Dealer Search
features and benefits
fields of application
Calculator
downloads
certificates
  • Low shrinkage during the curing phase.
  • Waterproof, resistant to weather conditions and frost, multi-purpose use indoors and out.
  • Creamy and workable consistency after adding water, easy to apply.
  • Fast setting, however processing time approx. 45 minutes.
  • Fine-grained surface, therefore no need to paint over.
  • Mechanical and manual application.
  • Tested to DAfStb guideline "Protection and repair of concrete elements".
  • Certified to EN 1504-3 R2.

Note: Fairing coat of PCI Peciment II system tested to DAfStb guideline "Protection and repair of concrete elements" (German committee for reinforced concrete). With official test certificate. Listed as repair mortar to ÖBV (Austrian quality label).

colour: grey
packaging: 25-kg-bag/ 5-kg-bag
  • For indoor and outdoor use.
  • For wall and overhead application.
  • For repair of honeycombs, filling of voids.
  • For resurfacing brickwork and render.
  • As fairing coat on concrete, fair-faced concrete and aerated concrete.
  • For levelling irregular wall surfaces prior to laying tiles and flagstones.
  • As levelling compound in swimming pools.
  • Fairing coat after concrete repair with PCI Peciment 50 at vertical fair-faced concrete surfaces not exposed to foot traffic in civil engineering and bridge construction to ZTV-ING for PCC II application: surfaces not exposed to vehicular traffic and subject to dynamical loads (e.g. bridge soffits).
  • As fairing coat for OS 4 or OS 5a coatings in accordance with DAfStb.
  • For layer thickness from 1 to 10 mm.
PCI Nanocret® FC
Fibre reinforced concrete smoothing compound
for walls and soffits
Technical Datasheet: 559
Thickness (mm):
Area (m²):
Your Result:
Quantity Required * approx (kg):
equivalent *
25-kg-bag (pieces):
5-kg-bag (pieces):
name Classification report EN 13501-1 (A2-s1,d0) rules and standards EN 13501-1 (A2-s1,d0) combined with product PCI Nanocret® FC